Lavadora Bosch Error E29: If you own a Lavadora Bosch washing machine and are experiencing Error E29, then you’re in the right place. This error code indicates that the sensor is unable to detect the water fill of the unit or is doing so too slowly. In this article, we will discuss the causes of Error and how to fix it.
Causes of Lavadora Bosch Error E29
Several factors can cause Error E29 in washing machines. Some of them include a twisted or clogged water supply hose, a clogged water filter, low water pressure in the plumbing, pressure switch malfunction, or Aquastop failure. In this case, it’s necessary to inspect the parts responsible for supplying water to your appliance.
How to Fix Lavadora Bosch Error E29
Here are the step-by-step instructions to fix Lavadora Bosch Error E29:
- Check water pressure: Check the water pressure in the tap to ensure it’s normal. If the pressure is low, try cleaning or replacing the tap’s filter.
- Inspect water supply hose: Make sure the water supply hose is not squeezed or clogged. Check for any kinks, twists, or damage to the hose.
- Clean filter mesh: Clean the filter mesh at the entrance to the washing machine. If the water quality is poor or contains rust, this is especially necessary. The filter mesh can usually be unscrewed, cleaned, and then screwed back into place.
- Check pressure switch: If the above steps don’t fix the E29 error, the pressure switch may be malfunctioning. To check this, you’ll need to remove the top panel of the washing machine.
- Locate pressure switch: Once the top panel is removed, locate the pressure switch. It is a round sensor to which several wires and a thin hose are connected.
- Disconnect hose: Disconnect the hose from the pressure switch by carefully pulling it off the switch’s nozzle. Be careful not to damage the hose or the nozzle.
- Reconnect hose: Reconnect the hose to the pressure switch by carefully pushing it back onto the nozzle until it clicks into place.
- Tap pressure switch: Gently tap on the pressure switch to return the membrane to its normal position. This can help to reset the switch and clear any faults.
- Test machine: Put the top panel back in place and test the washing machine. If the error persists, you may need to replace the pressure switch.
In Conclusion, If you’re experiencing Lavadora Bosch Error E29, there’s no need to panic. This article has provided you with how to fix it. With this information, you can fix the error code and get back to using your Lavadora Bosch washing machine in no time.
